Submersible pump cable can be used on all types of indoor and outdoor, mobile, portable and fixed pumping equipment including borehole pumps. It is available in a 3 core and 4 core with a blue and green sheath respectively.. The voltage rating for the cable is 600/1000V.
Welding cable is a single core, multistranded PVC insulated cable. The outer sheath is a soft and flexible grade from 16mm to 70mm. From 95mm to 185mm upwards the sheath is of rubber nitrile blend. Both types are rated 600/1000v
Two cores are laid flat with a bare copper wire laid in between. The 1mm to 2.5mm have a solid core but the 4mm to 16mm is a stranded core. The cable is used in house installations and can be used as under plaster wiring.
The Flame Retardant range of electric power, telecommunication and control cables are designed to reduce the propagation of fire along cables. These cables are designed to reduce the spread of fire along a cable tray or duct. FR cables are identified by the presence of a Red Stripe or the letters FR embossed onto the outer sheath.
espite advances in electronic flow control and measurement, a simple, direct visual confirmation of product flow is still required or preferred in many installations and applications. Intrico???s Sight Glasses are tried and tested in many road and rail tanker applications.
We do supply Velan???s API600, API603, UOP or Phillips HF Acid Service valves. This includes both carbon and stainless steel gate, globe and check valves and Memory Seal ball valves. All Velan valves we do supply have at least half Stellite (trim 8) ground and lapped seal welded seat rings which are 100% weld quality tested. Other trim options as per specification are available.
Manufactured in Japan KITZ???s stainless, carbon and high alloy steel gate, globe and check valves, flanged and screwed ball valves are used in many an industry including chemical, oil, petrochemical, food and beverage, pulp and paper, pharmaceutical and other industrial plants. These valves are manufactured to strictly conform with international standards and to meet the critical service conditions needed in corrosive industrial applications.
If you want to avoid loss of income, product contamination and increase in maintenance costs then you are covered with the 3Z 6D gate valves in our stock. These are developed for pump or metering stations, tank farms, marine loading docks and blending plants, completely isolate lines without leakage. Both up and downstream and in-line repair possibilities make these valves the ideal choice for most custody transfer applications..
For any other valve requirements and specifications note included in this section and or catalogue, please e-mail us an inquiry at email@example.com
High quality and technically advanced range of butterfly valves and actuators, the Tritec range of high performance Triple offset and double block & bleed process valves are designed to deliver positive shut-off in the harsh and critical environments found in oil and gas, petroleum and power process markets. All are available through Fermox Traders including an excellent range of lightweight aluminium butterfly valves which are perfectly suited to applications requiring lighter weight and corrosion resistance. We???ve a comprehensive stock of butterfly valves with lever, gearbox and pneumatic actuation options
Cost effective valves at competitive pricing and prompt delivery. The range includes flanged gate valves in both rising and no-rising spindle design, globe valves, strainers, swing and lift check valves in cast iron, Ideally suited for low pressure steam and water service. Sizes range from 50mm and above.
TLV produces dependable and long lasting steam traps. The comprehensive range available at Fermox Traders includes pressure/ temperature controls , air and gas traps, separators/ filters , valves, air vents measurement instruments, condensate recovery systems, Y-strainers, sight glasses, trap stations and steam and condensate manifolds.
Size: (L) 2.1 x (W) 2.1 x (H) 1.5m
Weight: Tent poles: 18kg
Features: 2 side windows with outside flaps. Solid / mozzi door and 1.5 m verandah/ skull cap.
Size: (L) 3.0 x (W) 3.0 x (H) 2.5m
Weight: Tent poles: 30kg
Features: 2 side windows with outside flaps inside closures. Solid / mozzi door and 1.8 m verandah/ skull fly and poles
The Ma3100 Series offers cost effective surge protection for applications where the surge protector could carry a partial of lightning surge current.
??? DIN Rail mountable IEC Class 1 and 2 products available.
??? The MA3160 is 50kA Class 1 rated
??? The MA3145 is 50kA Class II rated.
??? Full Range of AC mains power applications .
??? Coordinated surge protection to IEC 61312, rated according to IEC 61643.
These surge protector devices can be incorporated into or mounted close to, individual items of the electrical equipment providing immediate local protection against surges and electrical noise. Available with either a 5, 10, 15 or 30 amp operating current 110 to 240V working voltage and with 3 package types, this is a truly versatile range. MA05 and MA10 units are rated 6.5kA
??? Combines high quality filtering with ring suppression.
??? Three package types- DIN rail, wall/floor mounting and filter case.
??? Added thermal fuse protection.
??? EMC compliance, exceeding IEC 61000-4-5, level 4.
SD series surge protection devices combine unparalleled packing densities, application versatility, proven reliable hybrid circuitry and simple operation- features which make the series the ultimate surge protection solution for process equipment. SDX units, available in 7V, 16V, 32V and 55V versions they can shutdown systems and fire and gas detectors.
??? Low resistance surge protection devices.
??? Fuse/loop disconnect feature.
??? 20kA maximum surge current capability.
??? SIL suitable.
The TP48 surge protection device safeguards field-mounted process transmitted where it matters, right at the unit. After a simple installation, it provides high level protection against surges and transients whilst normal operation remains unaffected. The TP48 resets itself automatically after each operation.
The PT48 is available in 2, 3 & 4 wire versions with screw threads to suit different transmitters and is both explosion proof and intrinsically safe for hazardous areas. Working voltage is 35V DC maximum with impulse ratings of 20kA peak current and 10kV peak voltage.
??? Easy and direct mounting- simply screw into spare conduit entry
??? Parallel connection and flameproof to CENELEC standards.
The TP24/7 is uniquely configured to protect Multivariable Transmitters and Level Transmitters that typically use 24V supply and provide an output via RS485 communications link. The TP24/7 will also protect any applications using 24V on one pair of wires and a signal on the second pair.
inside the standard flameproof giving a 10kA level of protection. Installation and earthing is simple even existing installation can be upgraded by retrofitting the HW48.
??? Honeywell tested and approved for use with STT350 transmitters
??? Customised mounting for installation and wiring.
??? Analogue and smart meter compatible.
??? Retrofittable ??? easily fitted to existing installations
The FS32 surge protection device prevents surges and transient over-voltages conducted along the trunk and spurs of the fieldbus systems from damaging the associated electronics such as terminators, spur blocks and the bus control equipment . In operation the FS32 does not adversely affect the performance or operation of the fieldbus or connected equipment and allows the signals to pass with little attenuation.
??? Plug connectors for quick and easy connection
??? 20kA maximum surge current per line